KTM 890 Adventure (2023) vs Yamaha Tracer 7 (2023) vs Piaggio Typhoon 50 (2005-08) vs Kawasaki VN 900 Vulcan Custom (2011-12) vs Victory Cross Country (2010-11) vs Benelli Tre-K 1130 (2006-07) vs AJS Model 30 600 (1956) vs Yamaha FJ-09 / MT-09 Tracer / Tracer 900 (2015-16) vs KTM 450 SMR (2022) vs KTM 1290 Super Duke Special Edition (2016) vs AJS E95 Porcupine (1954) vs Kawasaki Z-X10R Ninja (2005) vs Husqvarna SM 450R (2004-05) vs Honda CBR 150R Repsol MotoGP Edition (2021) vs Husaberg FE 350 Enduro (2013-15) vs Ducati Panigale V2 (2021) vs Voxan Café-Racer (2004-08) vs Ducati Streetfighter V2 (2022) vs Victory Kingpin Low (2009-10) vs Highland 950 V2 Allroad (2006-) vs KTM 950 Supermoto (2005) vs Victory Hammer (2009-10) vs KTM 990 Duke R (2025)

Comparison technical specifications

Add bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike
Make:	KTM	Yamaha	Piaggio	Kawasaki	Victory	Benelli	AJS	Yamaha	KTM	KTM	AJS	Kawasaki	Husqvarna	Honda	Husaberg	Ducati	Voxan	Ducati	Victory	Highland	KTM	Victory	KTM
Model:	890 Adventure	Tracer 7	Typhoon 50	VN 900 Vulcan Custom	Cross Country	Tre-K 1130	Model 30 600	FJ-09 / MT-09 Tracer / Tracer 900	450 SMR	1290 Super Duke Special Edition	E95 Porcupine	Z-X10R Ninja	SM 450R	CBR 150R Repsol MotoGP Edition	FE 350 Enduro	Panigale V2	Café-Racer	Streetfighter V2	Kingpin Low	950 V2 Allroad	950 Supermoto	Hammer	990 Duke R
Years:	2023	2023	2005-08	2011-12	2010-11	2006-07	1956	2015-16	2022	2016	1954	2005	2004-05	2021	2013-15	2021	2004-08	2022	2009-10	2006-	2005	2009-10	2025
Engine:	Four stroke, parallel twin cylinder, DOHC, 4 valves per cylinder	Four stroke, parallel twin, DOHC, 4 valves per cylinder	Two stroke, single cylinder, Hi-PER2	Four stroke, V-twin, SOHC, 4 valves per cylinder	Four stroke, 50° V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters	Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder	Four stroke, pushrod parallel twin, OHV, 2 valves per cylinder,	Four stroke, transverse three cylinder, DOHC, 12 Valve	Four stroke, single cylinder, SOHC, 4 valve	Four stroke, 75°V-twin cylinder, DOHC, 4 valves per cylinder	Twin cylinder inclined at 45°, aluminium alloy, DOHC	Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder.	Four stroke, single cylinder, DOHC, 4 vlave	Four stroke, single cylinder, DOHC, 4 valves	Four stroke, single-cylinder, SOHC	Four stroke, Superquadro, 90° L-twin cylinder, DOHC, Desmodromic 4 valves per cylinder	Four stoke, 72°V-Twin cylinder, DOHC, 4 valves per cylinder	Four stroke, Superquadro, 90° L-twin cylinder, DOHC, Desmodromic 4 valves per cylinder	Four stroke, 50° V twin SOHC, 4 valves per cylinder	Four stroke, 60° V-Twin, DOHC, 4 valves per cylinder	Four stroke, 75°V-twin cylinder, DOHC, 4 valves per cylinder	Four stroke, 50° V twin SOHC, 4 valves per cylinder	Four stroke, parallel twin cylinder, DOHC, 4 valve per cylinder
Capacity:	889 cc / 54.3 cu-in	689 cc / 42.04 cu-in	49.4 cc / 3.0 cub in.	903 cc / 49 cu-in	1731cc /106 cu-in	1130 cc / 69 cu in	593 cc / 36.2 cu in	847 cc / 51.6 cu-in	449.9 cc / 27.4 cu-in	1301 cc / 79.3 cu-in	497 cc / 30.3 in	998 cc / 60.9 cu-in	449 cc / 27.4 cu-in	149.4 cc / 9.1 cu-in	349.7 cc / 21.3 cu-in	955 cc / 58.3 cu in	996 cc / 60.7 cu-in	955 cc / 58.3 cu in	1634 cc / 100 cu-in	936 cc / 57.1 cu-in	942 cc / 57.4 cu-in	1634 cc / 100 cu-in	947 cc / 57.8 cu-in
Bore x Stroke:	90.7 x 68.8 mm	80 x 68.6 mm	40 x 39.3 mm	88.0 x 74.2 mm	101 x 108 mm	88 x 62 mm	72 x 72.8 mm	78 x 59.1 mm	95 x 63.4 mm	108 x 71 mm	68 x 68.5 mm	76 x 55 mm	97 X 60.7 mm	57.3 x 57.8 mm	88 x 57.5 mm	100 x 60.8 mm	98 x 66 mm	100 x 60.8 mm	101 x 102 mm	95 x 96 mm	100 x 60 mm	101 x 102 mm	92.5 x 70.4
Cooling System:	Liquid cooled with water/oil heat exchanger	Liquid cooled	Air cooled	Liquid cooled	Air/oil cooled	Liquid cooled	Air cooled	Liquid cooled	Liquid cooled	Liquid cooling	Air cooled	Liquid cooled	Liquid cooled	Liquid cooled	Liquid cooled	Liquid cooled	Liquid cooled	Liquid cooled	Air / oil	Liquid cooled	Liquid cooling	Air / oil	Liquid cooled with water/oil heat exchanger
Transmission:	6 Speed	Constant Mesh, 6 speed	CVT, twist and go	5 Speed	6 Speed	6 Speed	4 Speed	6 Speed	5 Speed	6 Speed	4-Speed, close ratio	6 Speed	6 Speed	6 Speed	6 Speed	6 speed with Ducati Quick Shift (DQS) up/down EVO 2	6 Speed	6 speed with Ducati Quick Shift (DQS) up/down EVO 2	6 Speed	6 Speed	6 Speed	6 Speed	6-Speed
Front Suspension:	48mm WP APEX 43 forks	Telescopic forks	Telescopic hydraulic telescopic fork	41mm telescopic fork with 7-way preload	43mm Conventional telescopic fork	Marzocchi 50 mm Ø “upside down” fork damping, rebound and spring pre-load adjustment.	Hydraulic telescopic fork	41mm fork; adjustable preload and rebound damping	48mm Fully adjustable WP Xact inverted fork	WP-USD Ø 48 mm	AMC Teledraulic telescopic fork	43 mm inverted fork with top-out springs Compression damping - 16-way Rebound damping - 16-way Spring preload - Fully adjustable	Marzocchi "Upside-Down" telescopic hydraulic fork with advanced axle. compression and rebound stroke adjustment	Adjustable preload inverted forks	WP 4860MA HUSABERG SUPERMOTO, 300mm wheel travel.	43mm chromed inner tubes, fully adjustable Showa BPF fork	41mm Paioli inverted forks, 120mm wheel travel.	43mm chromed inner tubes, fully adjustable Showa BPF fork	43mm Inverted cartridge telescopic fork	50mm WP, adjustable compression and rebound	48mm WP Upside down adjustable	43mm Inverted cartridge telescopic fork	WP APEX, Compression High Speed (3 turns) Low Speed (30 Clicks), Rebound (30 Clicks), Preload (10 turns)
Rear Suspension:	WP APEX - Monoshock	Swinging arm, (link suspension)	Hydraulic single shock absorber	Uni-Trak with 7-way adjustable preload	Single, mono-tube gas forged and cast aluminum w/ rising-rate linkagel, preload adjustable spring	ASD steel tube trellis swingarm with Extreme Technology single shock absorber with adjustable rebound and spring preload.	Dual chocks	Rear Single shock; adjustable preload and rebound damping	Linkage-assisted WP Xact shock	WP-Monoshock	Dual AMC "Jam-pot" shocks	Bottom-Link Uni-Trak with gas-charged shock and top-out spring Compression damping - Stepless Rebound damping - Stepless Spring preload - Fully adjustable	Sachs progressive "Soft Damp" type with single hydraulic shock absorber, spring preload adjustment, compression and rebound adjustment	Adjustable preload mono-shock	WP-PD S shock absorber, 335mm wheel travel.	Fully adjustable Sachs unit. Aluminum single-sided swingarm	WP monoshock, 120mm wheel travel.	Fully adjustable Sachs unit. Aluminum single-sided swingarm	Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage	WP, adjustable stiffness, compression and rebound	WP shock, fully adjustable	Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage	WP APEX - Monoshock
Front Brakes:	2x 320mm discs with 4-piston radially mounted calipers	2x 298mm hydraulic discs	190 mm disc	Single 300mm disc	2x 300mm floating rotor 3 piston caliper	2 x 320 mm Ø, discs 4 piston caliper	Drum	2x 298mm discs	Single 310 mm disc with Brembo hydraulics	2 x Brembo 320mm 4 piston calipers	TLS drum, 203 mm / 8 in	2x 300mm discs 4 piston calipers	Single 320mm disc	Single hydraulic wave disc	Single 260mm 2 piston caliper	2 x 320 mm semi-floating discs, radially mounted Brembo Monobloc M4.32 4-piston calipers, Self bleeding master cylinder.	2x 320mm discs 4 piston calipers	2 x 320 mm semi-floating discs, radially mounted Brembo Monobloc M4.32 4-piston calipers, self bleeding master cylinder	Single 300mm floating rotor 4 piston caliper	Single 300mm disc 2 piston caliper	2x 305mm discs 4 piston calipers	2x 300mm floating rotor 4 piston caliper	2x 300mm discs, radially mounted BREMBO STYLEMA 4 piston caliper
Rear Brakes:	Single 260mm disc 2-piston floating caliper	Single 245mm hydraulic disc	100 mm drum	Single 270mm disc	Single 300mm floating rotor 2 piston caliper	Single 240 mm Ø disc, 2 piston caliper	Drum	Single 245mm disc	Single 220mm disc with Brembo hydraulics	Single Brembo 2 piston calipers	SLS drum, 203 mm / 8 in	Single 220 mm disc	Single 220mm disc	Single hydraulic wave disc	Single 220mm disc 1 piston caliper	245 mm disc, 2-piston caliper	Single 245mm disc 2 piston caliper	245 mm disc, 2-piston caliper	Single 300mm floating rotor 2 piston caliper	Single 220mm disc 1 piston calipers	Single 240mm disc 1 piston caliper	Single 300mm floating rotor 2 piston caliper	Single 240 mm disc, single piston BREMBO caliper
Fuel Capacity:	20 Litres / 5.3 US gal	17 Litres / 4.49 US gal	5.5 L / 1.45 US gal	20 Litres / 5.3 US gal	22.7 Litres / 5.8 US gal	18 Litres / 4.8 US gal	16 L / 4.2 US gal	18 Litres / 4.8 US gal	7 Litres / 1.85 US gal	18 Litres / 4.75 gal Unleaded premium fuel (95 RON)	19 L / 5.0 US gal	17 Litres / 4.4 US gal	9.2 Litres / 2.4 US gal	12 Litres / 3.1 US gal	9.5 Litres / 2.5 US gal	17 Litres / 4.5 US gal	17 Litres / 4.5 US gal	17 Litres / 4.5 US gal	17 Litres / 4.5 US gal	20 Litres / 5.2 US gal	15 Litres / 3.9 gal	17 Litres / 4.5 US gal	14.8 litres / 3.9 US gal