Moto-Data

Aprilia 125 Pegaso (1989-90) vs Honda CX 400 Custom (1983-) vs Aprilia RS 660 / Factory (2025)

Comparison technical specifications


Add bike
1989 Aprilia 125 Pegaso
Remove bike
1983 Honda CX 400 Custom
Remove bike
2025 Aprilia RS 660 / Factory
Remove bike
Make: Aprilia Honda Aprilia
Model: 125 Pegaso CX 400 Custom RS 660 / Factory
Years: 1989-90 1983- 2025
Engine: Two stroke, single cylinder, reed valves Four stroke, longitudinal 800 V-twin cylinder, camshaft nestles at the base of the V between the cylinders. ,OHV, 4 valves per cylinder operated by pushrods Four stroke, forward facing parallel twin, DOHC with silent chain drive on the right side, four valves per cylinder
Capacity: 124 cc / 7.6 cu in 396 cc / 24.1 cu-in 659 cc / 40.2 cu-in
Bore x Stroke: 54 x 54.5mm 81 x 63.93 mm
Cooling System: Liquid cooled Liquid cooled Liquid cooled with radiator and water-oil heat exchanger
Induction: Ø34 mm Dell'Orto carburetor 2x 34mm Keihin carburetors Airbox with front air intake. 2 x 52 mm throttle bodies, Ride-By-Wire management
Starting: Electric Electric Electric
Max Power: 23 kW / 31 hp @ 10000 rpm 40 hp / 29.8 kW @ 9500 rpm 105 hp / 73.5 kW @ 10500 rpm
Max Torque: 22.5 Nm / 2.3 kgf-m / 16.6 ft-lb @ 85000 rpm 32Nm / 23.6 lb-ft @ 7500 rpm 68 NM / 50.2 lb-ft @ 8500 rpm
Transmission: 6 Speed 5 Speed 6 Speed, Aprilia Quick Shift (AQS) System up and down (available as optional accessory)
Final Drive: Chain Shaft Chain, with drive ratio: 17/43
Front Suspension: Ø41 mm Inverted telescopic forks 39mm Showa telehydraulic fork RS: ? 41 mm Kayaba USD fork, rebound and preload adjustable RS Factory: 43mm ?hlins NIX 30 fork, spring preload, rebound and compression damping adjustable
Rear Suspension: Single chock preload adjustable Dual chocks RS: Kayaba monoshock, rebound and preload adjustable?hlins STX rear shock, spring preload, rebound and compression damping adjustable RS Factory: ?hlins monoshock, fully adjustable
Front Brakes: Single Ø300 mm disc, 2 piston caliper Single 275 mm discs 2 piston caliper 2x 320mm Brembo radial calipers with 4 horizontally opposed 32 mm pistons. Radial pump and metal braided brake hose
Rear Brakes: Single Ø220 mm disc, 1 piston caliper 160mm Drum Single 220mm disc; Brembo caliper with two 34 mm separate pistons. Master cylinder with separate reservoir and metal braided hose Multimap ABS (Cornering ABS available as optional accessory)
Front Tyre: 100/90-18 3.25-19 120/70 ZR 17
Rear Tyre: 120/80-17 3.75-16 180/55 ZR 17
Fuel Capacity: 14 Litres / 3.7 US gal 11 Litres / 2.9 US gal 15 Litres / 4.0 US gal