Triumph Street Twin (2019-2020) vs KTM 300 EXC Hardenduro (2025)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Triumph | KTM |
| Model: | Street Twin | 300 EXC Hardenduro |
| Years: | 2019-2020 | 2025 |
| Engine: | Four stroke, 270° Crank angle parallel twin, SOHC, 8 valves | Two stroke, Two stroke, single cylinder, with reed intake and exhaust control |
| Capacity: | 900 cc / 54.9 cu-in | 293.2 cc / 17.9 cu-in |
| Bore x Stroke: | 84.6 x 80 mm | 72 x 72 mm |
| Cooling System: | Liquid cooled | Liquid cooled |
| Lubrication: | Wet sump | Electronically Regulated Oil Pump |
| Induction: | Multipoint sequential electronic fuel injection, ride by wire | Keihin EFI, 39 mm throttle body |
| Ignition: | Digital | Vitesco Technologies EMS |
| Starting: | Electric | Electric |
| Clutch: | Wet, multi-plate assist clutch | Wet, DDS multi-disc clutch, Brembo hydraulics |
| Transmission: | 5-Speed | 6 Speed |
| Final Drive: | O ring Chain | X-Ring 520 |
| Frame: | Tubular steel cradle | Central double-cradle-type 25CrMo4 steel |
| Front Suspension: | 41 mm Kayaba fork, non-adjustable with cartridge damping | 48 mm WP XACT-USD |
| Front Wheel Travel: | 120 mm / 4.7 in | 300 mm / 11.8 in |
| Rear Suspension: | Kayaba twin shocks with adjustable preload | WP XPLOR Monoshock with PDS, Aluminium-reinforced polyamide |
| Rear Wheel Travel: | 120 mm / 4.7 in | 310 mm / 12.2 in |
| Front Brakes: | Single 310mm floating disc Brembo 4 piston fixed caliper | Single 260 mm disc, 2 piston caliper |
| Rear Brakes: | Single 255mm disc, Nissin 2 piston floating caliper | Single 220 mm disc, 1 piston caliper |
| Front Tyre: | 100/90-18 | 90/90-21 |
| Rear Tyre: | 150/70 R17 | 140/80-18 |
| Wheelbase: | 1415 mm / 55.7 in | 1489 mm / 58.6 in |
| Seat Height: | 760 mm / 29.9 in | 963 mm / 37.9 in |
| Fuel Capacity: | 12 Litres / 3.2 US gal | 9 Litres / 2.4 US gal |