Honda CL 350 (1970-73) vs KTM 990 Duke (2024)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Honda | KTM |
| Model: | CL 350 | 990 Duke |
| Years: | 1970-73 | 2024 |
| Engine: | Four stroke, Vertical parallel twin aluminum alloy, OHC, 2 valve per cylinder | Four stroke, parallel twin cylinder, DOHC, 4 valve per cylinder |
| Capacity: | 325 cc / 19.8 cu-in | 947 cc / 57.8 cu-in |
| Bore x Stroke: | 64 X 60.5 mm | 92.5 x 70.4 |
| Cooling System: | Air cooled | Liquid cooled with water/oil heat exchanger |
| Compression Ratio: | 9.3:1 | |
| Lubrication: | Wet sump | Forced oil lubrication with 2 oil pumps |
| Starting: | Electric & kick | Electric |
| Max Power: | 33 hp / 24.1 kW @ 9500 rpm | 121 hp / 90.59 kW @ 9250 rpm |
| Max Torque: | 26.4 Nm / 19.5 lb @ 8000 rpm | 103 Nm / 75.9 lb-ft @ 7750 rpm |
| Clutch: | Wet 8 plate 140 mm | PASC? antihopping clutch, mechanically operated |
| Transmission: | 5 Speed | 6-Speed |
| Final Drive: | Chain | Chain 520 X-ring |
| Frame: | Pressed/tubular semi-double cradle | Chromium-Molybdenum-Steel frame using the engine as stressed element, powder coated |
| Front Suspension: | Oil damped telescopic fork | WP APEX 43 |
| Front Wheel Travel: | 117 mm / 4.6 in | 140 mm / 5.5 in |
| Rear Suspension: | Pressurized gas damped swing arm | WP APEX - Monoshock |
| Rear Wheel Travel: | 73 mm / 2.9 in | 150 mm / 5.9 in |
| Front Brakes: | 180mm Drum, Two leading shoe | 2x 300mm discs, radially mounted 4-piston caliper |
| Rear Brakes: | 160mm Drum, Single cam | Single 240 mm disc,, 2-piston caliper |
| Front Tyre: | 3.00 -19 | 120/70-17 |
| Rear Tyre: | 3.50 -18 | 180/55-17 |
| Rake: | 63.0° | 24.2? |
| Wheelbase: | 1321 mm / 52.0 in | 1476 mm / 58.1 in |
| Seat Height: | 795 mm / 31.3 in | 825 mm / 32.5 in |
| Ground Clearance: | 180 mm / 7.1 in | 195 mm / 7.7 in |
| Wet Weight: | 156.5 kg / 345.0 lbs | 179 kg 395 lbs |
| Fuel Capacity: | 9 Litres / 2.4 US gal | 14.8 litres / 3.9 US gal |