Triumph Daytona 675 Special Edition (2012) vs Buell / EBR Buell XB12Ss Lightning Long (2008-09) vs Triumph Scrambler 1200 X (2024)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
Remove bike |
| Make: | Triumph | Buell / EBR | Triumph |
| Model: | Daytona 675 Special Edition | Buell XB12Ss Lightning Long | Scrambler 1200 X |
| Years: | 2012 | 2008-09 | 2024 |
| Engine: | Four stroke, in-line 3-cylinder, DOHC, 4 valve per cylinder. | 45° V-Twin, four stroke, pushrod actuated overhead valve. hydraulic self-adjusting lifters, 2 valve per cylinder. | Four stroke, 270? crank angle parallel twin, SOHC, 4 valves per cylinder |
| Capacity: | 675 cc / 41.2 cu in | 1203 cc / 73 cu in | 1197 cc / 73.0 cu-in |
| Bore x Stroke: | 76 x 49.6 mm | 88.9 x 96.8 mm | 97.6 x 80.0 mm |
| Cooling System: | Liquid-cooled | Air cooled | Liquid cooled |
| Compression Ratio: | 12.65:1 | 10.0:1 | 11.0:1 |
| Lubrication: | Wet sump | Dry sump | Wet sump |
| Induction: | Multipoint sequential electronic fuel injection with forced air induction | Ø49 mm downdraft DDFI II fuel injection | Multipoint sequential electronic fuel injection |
| Exhaust: | Stainless steel 3 into 1 system with valve in secondary and under seat silencer | Free breathing, 2-into-1 Tuned, tri-pass resonance chamber with InterActive valve and mass-centralized mounting | Brushed 2 into 1 exhaust system with single muffler |
| Starting: | Electric | Electric | Electric |
| Max Power: | 94 kW / 126 hp @ 12600rpm | 86.9 kW / 103 hp @ 6800 rpm | 89 hp / 66.2 kW @ 7250 rpm |
| Max Torque: | 73 Nm / 7.4 kgf-m / 54 ft/lb @ 11750rpm | 114 Nm / 11.6 kgf-m / 84 ft-lbs @ 6000 rpm | 110 Nm / 81.1 lb-ft @ 4500 rpm |
| Clutch: | Wet, multi-plate | Wet, multi-plate | Wet, multi-plate torque assist |
| Transmission: | 6 Speed | 5 Speed | 6 Speed |
| Final Drive: | O ring chain | Belt | X ring chain |
| Frame: | Aluminum beam twin spar, swingarm braced twin sided, aluminum alloy with adjustable pivot position | Aluminium frame with Uniplanar™ Powertrain vibration isolation system, fuel in frame | Tubular steel with aluminum swingarm |
| Front Suspension: | 41mm USD forks with adjustable preload, rebound and compression damping | Showa Ø43 mm inverted forks compression damping, rebound damping and spring preload adjustable | 47mm Marzocchi non-adjustable USD forks |
| Rear Suspension: | Monoshock with piggy back reservoir adjustable for preload, rebound and compression damping | Showa coil-over monoshock, remote underseat reservoir and adjustable compression damping, rebound damping and spring preload | Marzocchi fully adjustable piggy-back RSUs with twin springs |
| Front Brakes: | 2 x 308 mm Discs, 4 piston calipers | ZTL type brake, 6 piston, fixed caliper, Ø375 mm single-sided, inside out, stainless steel, floating rotor | 2x 310mm discs with 2-piston Nissen calipers |
| Rear Brakes: | Single 220 mm disc, 1 piston caliper | Single Ø240 mm disc, 1 piston floating caliper | Single 255mm disc with single-piston Nissen caliper |
| Front Tyre: | 120/70 ZR 17 | 120/70 ZR17 Dunlop D208FW | 90/90-21 |
| Rear Tyre: | 180/55 ZR 17 | 180/55 ZR17 Dunlop D208M | 150/70 R17 |
| Rake: | 23.9º | 22° | 26.2? |
| Trail: | 89.1 mm / 3.5 in | 119 mm / 4.7" | 124.5 mm / 4.9 in |
| Dimensions: | Length 2020 mm / 79.5 in Width (handlebars) 710 mm / 27.9 in Height without mirrors 1105 mm m / 43.5 in | Length: 2023 mm / 79.6" Width: 755 mm / 29.7" Height: 1091 mm / 43.0" | Length 2273 mm / 89.6 in Width 834 mm / 32.8 in with handlebars Height 1185 mm / 46.7 in without mirrors |
| Wheelbase: | 1395 mm / 54.9 in | 1372 mm / 54.0" | 1525 mm / 60 in |
| Seat Height: | 820 mm / 32.3 in | 775 mm / 30.5" | 820 mm / 32.2 in low seat 795 mm / 31.3 in |
| Fuel Capacity: | 17.5 Litres / 4.6 US gal / 3.8 Imp gal | 16.7 L / 4.4 US gal | 15 Litres / 4.0 US gal |