Honda CMX 1100 Rebel / DCT (2023)
Comparison technical specifications
Add bike |
Remove bike |
| Make: | Honda |
| Model: | CMX 1100 Rebel / DCT |
| Years: | 2023 |
| Engine: | Four stroke, parallel twin with 270°crank and Uni-cam, SOHC, 4 valves per cylinder |
| Capacity: | 1084 cc / 66.1 cu-in |
| Bore x Stroke: | 92.0 x 81.5 mm |
| Compression Ratio: | 10.1:1 |
| Cooling System: | Liquid cooled |
| Emission: | EURO5 |
| Induction: | PGM-FI electronic fuel injection with 46mm throttle bodies (Throttle By Wire) |
| Ignition: | Full transistorized ignition |
| Battery: | 112V/11.2AH |
| Starting: | Electric |
| Max Power: | 64 kW / 85.8 hp @ 7000 rpm |
| Max Torque: | 98 Nm / 72.2 ft-lb @ 4750 rpm |
| Clutch: | Wet multiplate clutch / DCT: Wet multiplate hydraulic 2-clutch |
| Transmission: | 6-speed Manual Transmission / DCT: 6-speed automatic Dual Clutch Transmission |
| Final Drive: | 525 chain, 16T x 42T |
| Frame: | Diamond |
| Front Suspension: | 43mm conventional telescopic fork with adjustable preload & dark titanium oxide coating |
| Front Wheel Travel: | 139.7 mm / 5.5 in |
| Rear Suspension: | Dual Showa shocks with 12.5mm shafts & adjustable preload, piggyback pressurized reservoirs |
| Rear Wheel Travel: | 93.9 mm / 3.7 in |
| Front Brakes: | Single 330mm floating disc, four-piston monobloc, radial-mount hydraulic caliper |
| Rear Brakes: | Single 256mm disc with single-piston hydraulic caliper |
| ABS System: | 2 channel ABS |
| Wheels: | Multi-spoke cast aluminium |
| Front Rim: | MT3.50 |
| Rear Rim: | MT5.00 |
| Front Tyre: | 130/70B18 M/C |
| Rear Tyre: | 180/65B16 M/C |
| Rake: | 28° |
| Fork Angle: | 30° |
| Trail: | 110 mm / 4.3 in |
| Dimensions: | Length: 2240mm / 88.1 in Width: 853 mm / 33.5 in / DCT: 834 mm / 32.8 in Height: 1115 mm / 43.9 in |
| Wheelbase: | 1520 mm / 59.8 in |
| Seat Height: | 700 mm / 27.5 in |
| Ground Clearance: | 120 mm / 4.7 in |
| Wet Weight: | 223 kg / 491.6 lbs - DCT 233 kg / 513.6 lbs |
| Fuel Capacity: | 13.6 Litres / 3.6 US gal |