MV Agusta F4 1000 Mamba (2006) vs Harley-Davidson Harley Davidson FXSTC Softail Custom (2007-08) vs Harley-Davidson Harley Davidson CVO Street Glide FLHXSE (2022)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
Remove bike |
| Make: | MV Agusta | Harley-Davidson | Harley-Davidson |
| Model: | F4 1000 Mamba | Harley Davidson FXSTC Softail Custom | Harley Davidson CVO Street Glide FLHXSE |
| Years: | 2006 | 2007-08 | 2022 |
| Engine: | Four stroke, transverse four cylinder. DOHC, 4 valves per cylinder | Four stroke, 45° V-Twin, Twin Cam 96 vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder | Four stroke, V-Twin, Milwaukee-Eight 117, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder |
| Capacity: | 998 cc / 60.9 cu-in | 1584 cc / 96 cu-in | 1923 cc / 117 cu-in |
| Bore x Stroke: | 76 x 55 mm | 95.3 x 111.1 mm | 103.5 X 114.3 mm |
| Cooling System: | Liquid cooled | Air cooled | Air cooled |
| Compression Ratio: | 12.0:1 | 9.2:1 | 10.2:1 |
| Induction: | Weber Marelli” 1.6 M ignition injection integrated system | Electronic Sequential Port Fuel Injection (ESPFI) | Electronic sequential port fuel injection (ESPFI) |
| Ignition: | Multipoint electronic injection | Single-fire, non-wasted, map-controlled spark ignition | Single-fire, non-wasted, map-controlled spark ignition |
| Starting: | Electric | Electric | Electric |
| Max Torque: | 109 Nm / 11.1 kgf-m @ 10200 rpm | 124.7 Nm / 92 ft/ lbs. @ 3000 rpm | 171 Nm / 126 lb-ft @ 3750 rpm |
| Clutch: | Wet, multiple discs, cable operated | Multi-plate, wet | Mechanically actuated 10 plate, wet Assist & Slip |
| Transmission: | 6 Speed | 6 Speed | 6 Speed |
| Final Drive: | Chain | Belt | Belt |
| Frame: | Aluminium, Trellis frame | Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded | Mild steel; tubular frame, two-piece stamped and welded backbone; cast and forged junctions; twin down tubes; bolt-on rear frame with forged fender supports; MIG welded |
| Front Suspension: | Inverted (USD) telescopic hydraulic fork with rebound-compression damping and spring preload adjustment, Titanium Nitride anti-friction treatment | 41.3 mm telescopic, chrome dust covers | 49mm Dual bending valve |
| Rear Suspension: | Progressive, single shock absorber with rebound and compression (High speed / Low speed) damping and spring preload (hydraulic control) | Hidden, horizontal-mounted, coil-over shock | Premium low hand-adjustable |
| Front Brakes: | 2x 310mm discs 6 piston calipers | Single 292mm disc 4 piston caliper | 2 x 300mm floating discs, 4-piston fixed calipers |
| Rear Brakes: | Single 210mm disc 4 piston caliper | Single 292mm disc 4 piston caliper | Single 300mm disc, 4-piston fixed fixed caliper |
| Front Tyre: | 120/65 ZR17 | MH90-21 54H | BW 130/60B19 61H |
| Rear Tyre: | 180/55 ZR17 | 200/55R17 78V | BW 180/55B18 80H |
| Trail: | 104 mm / 4.1 in | 127 mm / 5.0 in | 170 mm / 6.7 in |
| Dimensions: | Length 2007 mm / 79.0 in Width 685 mm / 26.9 in | Length 2400.3 mm / 94.5 in Width 927.1 mm / 36.5 in Height 1313.1 mm / 51.7 in. | Length 2435 mm / 95.9 in Width 960 mm / 37.8 in Height 1345mm / 53 in |
| Wheelbase: | 1408 mm / 55.4 in | 1699.2 mm / 66.90 in | 1625 mm / 64.0 in |
| Dry Weight: | 190 kg / 418.8 lbs | 304.8 kg / 672 lbs | 377 kg / 831 lbs |
| Fuel Capacity: | 21 Litres / 5.5 US gal | 18 9 Litres / 5 US gal | 22.7 Litres / US 6.0 gal |