Moto-Data

Gilera SP01 125 (1988-89) vs BRP Cam-Am Can-Am Spyder RT -S (2014-15)

Comparison technical specifications


Add bike
1988 Gilera SP01 125
Remove bike
2014 BRP Cam-Am Can-Am Spyder RT -S
Remove bike
Make: Gilera BRP Cam-Am
Model: SP01 125 Can-Am Spyder RT -S
Years: 1988-89 2014-15
Engine: Two stroke, single cylinder, reed valve Rotax 1330 ACE, four stroke, transverse three cylinder, DOHC, 4 valve per cylinder
Capacity: 124 cc / 7.6 cu-in 1330cc / 81.1 cu-in
Bore x Stroke: 56 x 50.5 mm 84 x 80 mm
Cooling System: Liquid cooled Liquid cooled
Compression Ratio: 12.5;1 12.2:1
Induction: 32mm Dell'Orto carburetors Electronic fuel injection and electronic throttle control
Ignition: Electric ignition with capacitive output Electronic ignition with dual output coil
Starting: Electric Electric
Max Power: 35 hp / kW @ 10600 rpm 115 hp / 83.9 kW @ 7250 rpm
Max Torque: 2.1 kgf-m @ 9700 rpm 130 Nm / 96 lb-ft. @ 5000 rpm
Clutch: Multi-disc oil bath Wet, multi-plate, manual or electronic operation through a hydraulic piston
Transmission: 6 Speed 6 Speed (semi-automatic optional)
Final Drive: Chain Belt
Front Suspension: Telescopic forks SACHS† shocks, Double A-arm with anti-roll bar
Rear Suspension: Swing arm gas single shock Swing-arm, Air preload SACHS shock
Front Brakes: Single disc Single 270mm discs 4 piston caliper per wheel
Rear Brakes: Single disc Single 270mm disc 2 piston caliper, with integrated parking brake
Front Tyre: 2.75-21 165 / 55 R15
Rear Tyre: 4.10-17 225 / 50 R15
Fuel Capacity: 27 Litres / 7.1 US gal