1984 BMW R 80 Mono technical specifications

Technical specifications

Model: R 80 Mono
Years: 1984-85
Engine: Four stroke, two cylinder horizontally opposed Boxer, pushrod operated 2 valves per cylinder.
Capacity: 797.5 cc / 48.7 cu in.
Bore x Stroke: 84.8 x 70.6 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Induction: 2 x Bing constant depression carburetors
Ignition: Battery ignition
Alternator: Bosch 12 V/280 W
Spark Plug: Bosch W 7 D / Beru14-7DU / Champion N9YC
Starting: Electric
Max Power: 36.4 kW / 50 hp @ 6500 rpm
Max Torque: 58 Nm / 5.9 kgf-m / 42 ft/lb @ 4000 rpm
Clutch: Dry single plate, with diaphragm spring
Transmission: 5 Speed
Final Drive: Shaft
Gear Ratio: 1st 4.40 /2nd 2.86 /3rd 2.07 /4th 1.67 /5th 1.50:1
Rear Wheel Ratio: 1:3.20 or 1:3.36
Frame: Double loop tubular frame with bolt on rear section
Front Suspension: Telescopic hydraulic forks.
Front Wheel Travel: 175 mm / 6.8 in
Rear Suspension: Monolever swinging arm.
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: Single ∅285mm disc, 1 piston calipers
Rear Brakes: ∅200mm Drum
Front Wheel: MTH 2.50 x 18 E
Rear Wheel: MTH 2.50 x 18 E
Front Tyre: 90/90-17
Rear Tyre: 120/90-18
Dimensions: Length 2175 mm / 85.6 in Width 800 mm / 31.2 in Height 1106 mm / 43.5 in
Wheelbase: 1447 mm / 56.9 in
Ground Clearance: 140 mm / 5.51 in
Wet Weight: 210 kg / 462 lbs
Fuel Capacity: 22 Litres / 5.8 US gal
Consumption Average: 5.9 L/100 km 17.0 km/l / 40 US mpg
Standing ¼ Mile: 14.5 sec
Top Speed: 180 km/h / 112 mph

Photo gallery