1980 Benelli 125 Enduro technical specifications

Technical specifications

Model: 125 Enduro
Years: 1980
Engine: Two stroke, twin cylinder
Capacity: 125 cc / 7.6 cu in
Bore x Stroke: 56 x 49 mm
Compression Ratio: 9.83:1
Cooling System: Air/oil cooled
Induction: Dell'Orto VHB 22BS
Ignition: Flywheel magneto 6 volt
Starting: Kick start
Clutch: Wet, multiplate
Transmission: 5 Speed
Final Drive: Chain
Gear Ratio: 1st 27.45 / 2nd 16.73 / 3rd 12.88 / 4th 10.67 / 5th 8.87:1
Frame: Welded, tubular, twin-downtube cradle.
Front Suspension: Telescopic, oil damped.
Rear Suspension: Box-section swinging arm controlled by oil-damped, coil-sprung suspension units with 3 pre-load settings.
Front Brakes: 135 mm Drum
Rear Brakes: 135 mm Drum, caliper type
Front Wheel: 2.50-21
Rear Wheel: 3.50-18
Dimensions: Length: 1971 mm / 77.6 in Width: 841 mm / 33.1 in Height: 1120 mm / 44.1 in
Wheelbase: 1285 mm / 50.6 in.
Ground Clearance: 229 mm / 9.0 in.
Seat height:: 813 mm / 32.0 in
Dry Weight: 98kg / 2161b.
Fuel Capacity: 8.5 Litres / 1.9 US gal.
Top Speed: 105 km/h / 65 mph
Colours: Red, Black, Green, Blue, Yellow

Photo gallery